Slab and roof
Sunroom additions in Tampa are built like any other room, starting below the floor. The glass walls stand on a slab with a footing along its edge, the thickened band of concrete that carries the walls and the roof down to the soil.
More on slab and roof
An existing patio slab is checked for its thickness, cracks, level and drainage before it is asked to carry them: one poured for patio chairs is often about four inches thick with no footing at all, so it is given a footing along its edge or replaced.
Enclosing a covered lanai or a screened porch starts from what is already there. Where the lanai sits under the house’s own roof and that roof is sound, the screens come out and framed walls with windows go in beneath it. An aluminum screen cage is a different case: it was never built to carry glass or a solid roof, so it comes down and the room is framed new. On a flood-mapped lot the new floor also has to reach the height the flood map sets for living space, which a patio slab poured a step below the house often does not, a test the flood-zone remodeling guide explains.
Above, the new roof is framed into the house’s wall or roof and flashed where the two meet, the joint where a sunroom most often leaks, so the flashing laps under the house’s siding or shingles instead of being caulked over them. A studio roof slopes gently down from below the eave, a cathedral roof rises to a gable for a taller ceiling, and either takes the pitch and the shingles or metal of the roof beside it.



