These are market ranges, not our prices. Use them to budget, and to check that a quote covers the prep your floor needs.
Flooring installation cost by material
| Floor | Installed, per sq ft | Labor, per sq ft | Source |
|---|---|---|---|
| Luxury vinyl plank | $3 to $16; most pay $5 to $12 | $1.50 to $6 | 1 |
| Laminate | $6 to $14 | $4 to $8 | 2 |
| Hardwood, engineered or solid | $8 to $14 engineered; $9 to $23 solid | $3 to $6 | 3 |
| Ceramic tile | Quoted by the job | $7 to $14 | 4 |
| Porcelain tile | Quoted by the job | $7 to $14 | 4 |
| Carpet | $1.36 to $13.58; average $7.47 | $0.74 to $1.17 | 5 |
Luxury vinyl plank
Most rigid-core plank is one of two types. Fixr prices SPC (stone-plastic composite) material at $3.50 to $7 a square foot and WPC (wood-plastic composite) at $4 to $12, before labor. Thinner planks need a flatter base, which can add leveling.
Laminate
Thickness drives the material price. Fixr lists 8 mm laminate at $0.99 to $1.79 a square foot and 12 mm at $2.29 to $5.99. Labor runs $4 to $7 for a floating floor and $5 to $8 glued down.
Hardwood
Fixr prices floating hardwood, the simplest way to lay an engineered floor, at $7 to $12 a square foot installed, so it can start a dollar under the engineered range in the table, and a click-and-lock floor at $10 to $14. Solid wood costs less to buy but more to install, so at the low end the two end up close once they are down.
Tile
Material varies more than labor. Fixr lists ceramic at $1 to $30 a square foot and porcelain at $3 to $30 before installation.
Tile carries the highest labor because it needs a flat, stable base and careful layout. Large-format tile of 18 to 24 inches starts at $10 to $12 a square foot for labor, and glass or mosaic runs $12 to $14. Any pattern other than a straight lay adds 10% to 20% to the job. See tile installation.
Carpet
Most installers include removing the old carpet in the labor price. Padding adds $0.35 to $1.14 a square foot, and Fixr’s advice is to follow the carpet maker’s padding recommendation rather than skimp.
What a quote adds beyond the floor
The per-square-foot price covers the new floor going down. These items often sit on their own lines.
- Removing the old floor: $1 to $3 a square foot for most floors, $1.50 to $3.25 for tile, and close to $6 where layers are stacked. Carpet comes up for $0.25 to $0.75.
- Tile set in a thick mortar bed, and old glue-down vinyl, take the longest to remove.
- Replacing a damaged wood subfloor: $3 to $12 a square foot.
- Baseboards: about $1 a linear foot extra to remove and reinstall. Adding quarter round at the base is the alternative.
- Extra material: about 10% over the room’s area for cuts, plus 10% to 20% more for patterns.
- Underlayment: most laminate needs one. Luxury vinyl plank generally goes down without one, except where a vapor barrier is needed.
Switching from one floor to another
Flooring cost by room and for a whole house
| Space | Size Fixr assumes | Typical range | Source |
|---|---|---|---|
| Bathroom | 50 to 100 sq ft | $250 to $2,500 | 6 |
| Bedroom | About 150 sq ft | $750 to $3,750 | 6 |
| Kitchen | About 200 sq ft | $1,000 to $5,000 | 6 |
| Floor area | 1,000 sq ft | $5,000 to $25,000 | 6 |
| Floor area | 1,500 sq ft | $7,500 to $37,500 | 6 |
| Floor area | 2,000 sq ft | $10,000 to $50,000 | 6 |
These room totals include labor.
If the floor is part of a larger project, see kitchen remodel cost or bathroom remodel cost.
Concrete slabs, moisture and Florida humidity
If your house sits on a concrete slab, moisture in the concrete limits which floors suit it and what prep they need. Ask any installer how they will check the slab and what the product’s installation instructions require.
Wood needs the most care. A slab must be dry and level before wood goes down, and a vapor retarder is required. Engineered wood can go over concrete. Solid wood is more susceptible to moisture.
Laminate has a fiber-based core that can swell or warp if it gets wet. Fixr advises against it in bathrooms, laundry rooms and other high-humidity rooms. It also notes that water-resistant laminate is not waterproof.
Luxury vinyl plank is plastic and resists moisture. In damp areas, Fixr suggests a vapor barrier under it.
Condos
In a condo, read the association’s flooring rules before you order. Ask whether hard floors need approval and whether a sound-rated underlayment is required. See condo remodeling.
Older floors: test before you tear out
In an older house, find out what the old floor is before anyone scrapes it up. The EPA says you generally cannot tell whether a material contains asbestos by looking at it.
The EPA advises against sanding or leveling asbestos flooring or its backing. It says samples and removal belong to trained, accredited professionals. Where asbestos flooring needs replacing, its advice is to install the new floor over it if possible.
If abatement is needed, Fixr lists it from $200 to $400 an hour. Covering the old floor, where the new floor allows it, can take that cost off the quote.
If part of a floor can be saved, see flooring repair.
How to compare flooring quotes
Ask each installer to price the same scope, then compare line by line. A complete quote names each of these:
- The area measured, and the waste allowance added to it
- Removal and disposal of the old floor, by type
- Slab or subfloor prep: moisture testing, grinding or leveling
- Underlayment or vapor barrier, and which product
- Transitions at doorways and where floors meet
- Baseboards: removed and reinstalled, replaced, or quarter round added
- Moving furniture and appliances, and removing and resetting toilets
- Who buys the material, and who pays if it runs short
In the City of Tampa, replacing floor covering such as carpet, vinyl or tile is listed as work that needs no building permit, regardless of cost. Other cities and counties set their own rules, and subfloor, structural or plumbing work can change the answer. See remodeling permits.
For installation by our team, see flooring installation.
Flooring installation cost questions
Is it cheaper to install flooring yourself?
On materials, yes. Fixr puts DIY laminate at $1.50 to $6 a square foot for materials, against $6 to $14 installed. The gap narrows when the old floor has to come out, the slab needs leveling or the floor is tile, which takes skill to set flat.
Can new flooring go over old tile?
Sometimes. Fixr says tiling over existing tile is not always recommended and advises removal first, partly because old floors may contain asbestos. Floating floors such as luxury vinyl plank or laminate need a flat, level base, so loose or uneven tile has to be fixed or removed first.
How long does it take to install a new floor?
Fixr says a two-person crew installs most hardwood floors under 1,500 square feet in one to three days. Removing the old floor and preparing the slab add time. Wood also has to acclimate to the home’s temperature and humidity before it goes down, unless the manufacturer says otherwise.
How much does bamboo flooring cost to install?
Fixr’s bamboo guide, last updated in August 2022, puts it at $10 to $25 a square foot installed, with labor at $8 to $12. Bamboo absorbs water and can swell, so Fixr recommends engineered or strand-woven bamboo for damp rooms. Because that guide is older, check current prices before you budget.
Get a flooring quote
A quote needs the measured area, the floor you choose and a look at what is underneath.
Sources
- 1.Fixr, Luxury Vinyl Plank Flooring Installation Cost, updated January 31, 2025 (opens in a new tab), checked
- 2.Fixr, Laminate Flooring Installation Cost, updated January 31, 2025 (opens in a new tab), checked
- 3.Fixr, Cost to Install Hardwood Flooring, updated January 31, 2025 (opens in a new tab), checked
- 4.Fixr, Tile Flooring Installation Cost, updated January 31, 2025 (opens in a new tab), checked
- 5.Fixr, How Much Does It Cost to Install New Carpeting?, updated January 31, 2025 (opens in a new tab), checked
- 6.Fixr, Floor Replacement Cost, updated January 31, 2025 (opens in a new tab), checked
- 7.Fixr, Cost to Install Bamboo Flooring, updated August 19, 2022 (opens in a new tab), checked
- 8.US EPA, Protect Your Family from Exposures to Asbestos, updated June 25, 2026 (opens in a new tab), checked
- 9.City of Tampa Construction Services, How Do I, updated September 21, 2026 (opens in a new tab), checked




