In the federal government’s 2020 household energy survey, air conditioning took 28% of the energy used in Florida homes, against 9% for the country as a whole. That is why this list starts at the roof and the glass, where the heat gets in.

Most of these energy-efficient home improvements cost least inside a remodel you are already planning. An open ceiling, a bathroom stripped to the studs or a roof being replaced is the moment to add insulation, reroute a duct or change a fixture, which is how we fold them into a whole-home renovation.

Start with a free energy audit

Tampa Electric, Duke Energy Florida and FPL each offer their residential customers a free energy audit, and all three can be done online. Your electric bill tells you which one is yours. The audit reads your real usage and points to the few changes worth paying for in your house.

Book it before you sign for insulation or air conditioning work. Utility rebates often depend on an audit or an inspection first: Tampa Electric’s ceiling insulation rebate needs a pre-approval attic inspection, and Duke Energy Florida ties its home improvement rebates to its free Home Energy Check. Amounts change, so check the program page.

An audit cannot see inside the walls. When a remodel opens them, look at what is there before they close again: the insulation in the exterior walls, the ducts above the ceiling, the age of the water heater.

Seal and insulate the attic, then fix the ducts

Sun on the roof heats the attic, and that heat works down through the ceiling all afternoon. Sealing and insulating the attic floor deals with it directly, and it needs nothing else in the house opened.

Seal first, then insulate, which is the order ENERGY STAR recommends. Gaps around pipes and wires, the attic hatch and old recessed lights let attic air leak into the rooms below, and they are easiest to reach before new insulation covers them.

ENERGY STAR recommends R49 for an uninsulated attic in climate zone 2, which takes in Hillsborough and Pinellas counties, or adding R38 where 3 to 4 inches are already down. South Florida’s zone 1 calls for less: R30, or R25 over existing insulation.

If the air conditioning ducts run through the attic, have them tested while you are up there. A leaky joint on the return side pulls hot attic air into the system, and one on the supply side blows cooled air into the attic. Tampa Electric lists ductwork among its rebates, and Duke Energy Florida’s program covers duct testing and repair.

Choose windows by the sun heat they block

On a window label, the number to read first in Tampa Bay is the solar heat gain coefficient, or SHGC: the share of the sun’s heat that gets through the glass. The lower it is, the less work for the air conditioner. For Hillsborough County, ENERGY STAR certifies windows with an SHGC of 0.23 or lower and a U-factor of 0.32 or lower.

Here a window is also a storm decision. The Florida Building Code requires exterior glass in windborne debris regions to be protected from flying debris, either by impact-rated glass or by shutters. An impact window with low-E glass does both jobs in one opening, and your building department confirms whether your address falls in a debris region.

When new windows are not in the budget, shade the glass that takes the afternoon sun. Exterior shades, awnings and trees on the west side stop the heat before it reaches the glass, which blinds on the inside cannot do.

Size the new air conditioner to the improved house

Replace the air conditioner after the attic, ducts and windows, not before. The Department of Energy notes that as a home’s efficiency improves, the right size of its cooling system drops, so a unit sized for the old house is too big for the new one. In a humid climate an oversized unit runs in short bursts, and short cycles leave moisture in the air.

Ask for a Manual J load calculation, the Air Conditioning Contractors of America method for sizing a system to your house, rather than a size guessed from square footage. For efficiency, Tampa Electric’s rebates start at SEER2 15.2 and pay more at SEER2 16.2, a useful marker even if you are not its customer.

HVAC, insulation and window rebates in Tampa Bay

The current rebates on HVAC systems, ductwork and insulation come from the electric utilities, so check theirs first. In 2025, Tampa Electric (TECO) and Duke Energy Florida both offered rebates for air conditioner and heat pump replacements, duct sealing, insulation upgrades and smart thermostats. Amounts and terms change, so this guide names the programs and leaves the dollar figures to their own pages; read yours before the contract is signed.

For an HVAC upgrade, efficiency sets the rebate, and Tampa Electric’s starts at the SEER2 rating in the section above. Two upgrades pair well with an HVAC job and carry rebates of their own: duct testing and sealing, and attic insulation. A manufacturer’s promotion on a heat pump is a separate offer from a utility rebate, and whether you can combine the two is set by each one’s terms, so read both. The ENERGY STAR Rebate Finder is a place to start for the programs in your area.

Window rebates and tax credits

Don’t count on a TECO window rebate: the Tampa Electric rebates we found cover ceiling insulation, ductwork, heating and cooling, and smart thermostats, and none of them is for windows, so read the utility’s current list before you buy. Federal tax credits for window replacement in Tampa, as everywhere else, ended with the credits described under solar below, so choose new windows for the sun heat they block.

Replace an electric tank with a heat pump water heater

A heat pump water heater pulls heat out of the air around it and moves it into the tank. The Department of Energy puts these units at two to three times the efficiency of a standard electric water heater. In Florida they bring a side benefit: ENERGY STAR notes they cool the space they sit in and help dehumidify it in hot, humid weather.

They need room to breathe. ENERGY STAR calls for at least 1,000 cubic feet of air around the unit and a space that stays between 40 and 90 degrees year-round, so check the maker’s operating range before putting one in a closed garage that runs hotter in summer.

Fixr’s 2026 cost guide puts a 50-gallon heat pump unit at $2,000 to $5,500 installed, against $700 to $1,900 for a standard 50-gallon electric tank. Both are national ranges.

Tankless heaters suit a smaller household best. The Department of Energy finds them 24% to 34% more efficient than a storage tank in homes using 41 gallons of hot water a day or less, and 8% to 14% more efficient in homes using around 86 gallons.

Sustainable bathroom fixtures

Toilets account for nearly 30% of the water used indoors in an average home, and showers for nearly 17%, according to the EPA. Its WaterSense label marks toilets, showerheads and faucets that use less water than the federal standard and are independently certified to perform. Each can go in on its own, or as part of a bathroom remodel.

Sustainable bathroom fixtures
FixtureFederal standardWaterSense labelEPA estimate of savings
Toilet1.6 gallons per flush1.28 gallons per flush or lessNearly 13,000 gallons a year when older toilets are replaced
Showerhead2.5 gallons per minute2.0 gallons per minute or less2,700 gallons a year for the average family
Bathroom faucet2.2 gallons per minute1.5 gallons per minute or less700 gallons a year for the average family

For sustainability and value, start with the toilets. An older toilet can use as much as 6 gallons a flush, and a dual-flush model gives a smaller flush for liquid waste. Fixr’s 2026 cost guide puts a toilet replacement at $250 to $800 installed and a dual-flush toilet at $250 to $1,200, national figures.

Homeowners in Hillsborough, Pasco and Pinellas counties, and in the cities of Tampa, St. Petersburg and New Port Richey, can apply for a high-efficiency toilet rebate through the regional Tampa Bay Water Wise program. Read its current terms before you buy, and keep the receipt.

Energy-efficient bath fixtures save power as well as water. A WaterSense showerhead saves energy because the water it saves is heated water: the EPA estimates more than 330 kilowatt hours a year for the average family. The exhaust fan is the bathroom’s other energy user. ENERGY STAR certified fans use about 48% less energy than standard models, and a humidity sensor runs one until the room is dry rather than until someone remembers it. Size the fan to the room with the figures in our bathroom remodel planner.

Choose low-VOC, long-lived materials

Paints, strippers, adhesives and finishes release volatile organic compounds, or VOCs, into the air. The EPA finds levels of several of these compounds average 2 to 5 times higher indoors than outdoors, and during paint stripping they can reach 1,000 times outdoor levels. Choose low- or zero-VOC paints, sealers and adhesives, and keep fresh air moving while they cure.

Two labels do most of the checking for you. GREENGUARD certification, run by UL, means a product has been tested for low chemical emissions into indoor air. An FSC label means the wood comes from forests managed to the Forest Stewardship Council’s standards, from recycled material, or from a mix of the two with controlled sources.

In a humid climate, durability is part of being green. A material that has to come out again in ten years has been made twice. Porcelain tile, quartz or solid-surface tops and PVC trim stand up to bathroom moisture, and reclaimed wood, such as heart pine salvaged from older houses, gives new floors and shelves a second life.

Keep what you remove out of the landfill

The greenest material is the one already in the house. Keeping the footprint, the plumbing layout and sound cabinet boxes means less is torn out and less is bought new; new doors on old cabinets are one example, covered on our kitchen cabinets page.

What does come out can often be used again. Habitat for Humanity ReStores sell donated renovation materials, surplus building products, appliances and furniture to fund Habitat’s home building, and most offer pickup of large items. Plan the demolition so cabinets, doors and fixtures come out whole.

Ask how the jobsite handles the rest. Metal, cardboard and clean concrete can be kept apart for recycling instead of all going into one dumpster.

Add solar after the house needs less

Solar comes last on purpose. Every kilowatt hour the attic, windows and water heater save is one the panels no longer have to make, so the system can be smaller.

Florida helps at two levels. Solar energy systems are exempt from the state sales tax, and the value solar equipment adds to a home is left out of its property tax assessment. The federal credits are gone: the IRS lists the residential clean energy credit as unavailable for property placed in service after December 31, 2025, and the energy efficient home improvement credit as covering improvements made through that date.

If the roof has only a few years left, replace it first. Panels have to come off and go back on when a roof is replaced under them, and a new roof is also the time to choose a lighter, more reflective surface.

Questions about eco-friendly renovations

Do WaterSense fixtures work as well as standard ones?

They are tested for it. A WaterSense showerhead has to meet minimum spray force and coverage requirements, and a labeled toilet has to pass waste-removal testing, both checked by an independent certifying body before the label goes on.

What can I do without a remodel?

Quite a lot. Sealing and insulating the attic, a WaterSense showerhead, faucet aerators and a smart thermostat need no walls opened. Tampa Electric’s rebate list includes ENERGY STAR smart thermostats.

Do utility rebates require a particular contractor?

Often, yes. After its attic inspection, Tampa Electric gives you a list of approved contractors for the ceiling insulation rebate, and its air conditioning rebates go through a registered contractor who deducts the rebate from your invoice, so for an HVAC upgrade the contractor, not you, will file the rebate paperwork. Ask any contractor you are considering whether they take part in your utility’s program before the work starts.

How can I make my home more energy efficient before winter?

In Tampa Bay the cold spells are short, and the work that keeps summer heat out also keeps winter warmth in. Seal the gaps and cracks around windows, doors, pipes and the attic hatch, where heated air escapes as easily as cooled air does. If the house has a heat pump, have it serviced before the first cold night, since on cool evenings it runs in reverse to pull heat from the outdoor air into the house.

What are the advantages of eco-friendly home remodeling?

Lower energy costs, mainly from cooling, which takes a far larger share of a Florida home’s energy than the national average. Lower water use from WaterSense fixtures, cleaner indoor air from low-VOC finishes, materials that hold up in the humidity, and less sent to the landfill.

Do eco-friendly upgrades need a permit?

Many do. Florida’s building code requires a permit to install or replace an electrical, gas, mechanical or plumbing system, which takes in a new water heater, air conditioner or solar array, and replacement windows and doors are permitted work too. Your city or county building department confirms the list for your address, and remodeling permits shows how the process runs.

Sources

  1. 1.Fixr, 50-Gallon Water Heater cost guide (updated January 26, 2026) (opens in a new tab), checked
  2. 2.Fixr, Toilet Installation cost guide (updated January 28, 2026) (opens in a new tab), checked
  3. 3.U.S. Energy Information Administration, Residential Energy Consumption Survey 2020 release (June 15, 2023) (opens in a new tab), checked
  4. 4.Tampa Electric, Energy Audit (opens in a new tab), checked
  5. 5.Duke Energy Florida, home improvement rebates release (June 22, 2023) (opens in a new tab), checked
  6. 6.FPL, Residential Energy Survey Program Standards (opens in a new tab), checked
  7. 7.Tampa Electric, Ceiling Insulation rebate (opens in a new tab), checked
  8. 8.ENERGY STAR, Attic Insulation Project (opens in a new tab), checked
  9. 9.ENERGY STAR, Recommended Home Insulation R-Values (opens in a new tab), checked
  10. 10.Florida Building Commission, Florida Energy Conservation Code, Chapter 3 climate zone table by county (opens in a new tab), checked
  11. 11.Tampa Electric, Heating and Cooling rebate (opens in a new tab), checked
  12. 12.ENERGY STAR, climate zone requirements for windows, Hillsborough County, Florida (opens in a new tab), checked
  13. 13.Florida Building Code, Residential, 8th Edition (2023), Chapter 3 (via UpCodes) (opens in a new tab), checked
  14. 14.U.S. Department of Energy, Technology Fact Sheet: Right-Size Heating and Cooling Equipment (opens in a new tab), checked
  15. 15.U.S. Department of Energy, Building Science Education: Heat Pump Water Heaters (opens in a new tab), checked
  16. 16.ENERGY STAR, Heat Pump Water Heaters (opens in a new tab), checked
  17. 17.U.S. Department of Energy, Energy Saver: Tankless or Demand-Type Water Heaters, checked
  18. 18.U.S. EPA WaterSense, Residential Toilets (opens in a new tab), checked
  19. 19.U.S. EPA WaterSense Specification for Showerheads, Version 1.1 (July 2018) (opens in a new tab), checked
  20. 20.U.S. EPA WaterSense, Showerheads (opens in a new tab), checked
  21. 21.U.S. EPA WaterSense, Bathroom Faucets (opens in a new tab), checked
  22. 22.Tampa Bay Water, Tampa Bay Water Wise regional rebate program (opens in a new tab), checked
  23. 23.ENERGY STAR, Ventilation Fans (opens in a new tab), checked
  24. 24.U.S. EPA, Volatile Organic Compounds' Impact on Indoor Air Quality (opens in a new tab), checked
  25. 25.UL Solutions, What Does GREENGUARD Certified Mean? (opens in a new tab), checked
  26. 26.Forest Stewardship Council, FSC labels (opens in a new tab), checked
  27. 27.Habitat for Humanity, ReStores (opens in a new tab), checked
  28. 28.Florida Statutes 212.08(7)(hh), solar energy systems (2025) (opens in a new tab), checked
  29. 29.Florida Statutes 193.624, renewable energy source devices (2025) (opens in a new tab), checked
  30. 30.IRS, Residential Clean Energy Credit (page reviewed July 4, 2026) (opens in a new tab), checked
  31. 31.IRS, Energy Efficient Home Improvement Credit (page reviewed April 28, 2026) (opens in a new tab), checked
  32. 32.Florida Building Code, Building, 8th Edition (2023), Section 105.1 (via UpCodes) (opens in a new tab), checked