Riser diagrams with the plumbing plan
For a plumbing permit, the city’s permit requirements page asks for plumbing plans with water and sewer riser diagrams, and ADA details as required. A riser diagram is a drawing of the piping itself: each fixture’s drain and vent, the pipe sizes, and the water lines from the shut-off to every fixture they feed.
More on riser diagrams
A bathroom that moves its fixtures is laid out on that drawing pipe by pipe before the permit is issued. A toilet shifted along a wall, a second sink at the vanity or a drain moved to the middle of a wider shower each becomes a new run on paper, sized and vented, at the place where the inspector will later look for it. A bathroom that keeps every fixture where it stands has little to draw, and that is often the difference in how quickly its plans are put together.
Venting belongs on the same sheet. Each relocated toilet, basin or shower needs its own route to a vent, usually a new pipe tied into the existing stack above the ceiling, and the vent stacks are among the things the city’s inspector tests for leaks at the plumbing second rough, so the drawing shows where each one joins.
